MV1C

From MVS
Revision as of 19:05, 30 May 2018 by Ack (talk | contribs) (Created page with "==Board Scans - Set 1== * The battery was removed * The heat sink on the audio amp was removed before scanning * The audio amp was bent forward a bit to allow the board to be...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Board Scans - Set 1

  • The battery was removed
  • The heat sink on the audio amp was removed before scanning
  • The audio amp was bent forward a bit to allow the board to be closer to the scanning bad.
  • Any standoffs seen are related to the scanning and are not part of the board itself
main board top
main board bottom
Retrieved from "http://www.mvs-scans.com/index.php?title=MV1C&oldid=6805"