MV1ACHX

From MVS
Revision as of 01:05, 20 August 2018 by Ack (talk | contribs) (Created page with "==Board Scans - Set 1== This board type seems to be uncommon. The boards below are from a junk/as is lot I got off ebay so there are some issues with the board * PAL1 and PAL...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Board Scans - Set 1

This board type seems to be uncommon. The boards below are from a junk/as is lot I got off ebay so there are some issues with the board

  • PAL1 and PAL2 are missing
  • The LO ROM is ruptured
  • PC10 is missing from the bottom of the main board (near the PALs)
  • I don't have the slot board
  • The heat sink on the audio amp was removed before scanning
  • The bios is soldered to the board
  • Any standoffs seen are related to the scanning and are not part of the board itself
main board top
main board bottom
File:Mv1achx set1 slot front.jpg
slot board front
File:Mv1achx set1 slot back.jpg
slot board back
Retrieved from "http://www.mvs-scans.com/index.php?title=MV1ACHX&oldid=6851"